2017 aluminum rod is a heat-treatable wrought alloy, rich in copper content. It offers high strength, excellent mechanical properties, and superior fatigue strength, along with good machinability. However, 2017 aluminum cannot be welded using traditional welding methods and can only be welded using resistance welding. Its strength is slightly lower than that of 2014 aluminum but higher than that of 2011 aluminum.
Widely used in aerospace components, automotive parts, machinery equipment, pulleys, and cold-headed fasteners such as rivets and screws.
Msatar supplies ASTM B211 compliant A92017 aluminum rods produced through a cold drawing process, offering higher dimensional accuracy, superior surface finish, and enhanced mechanical properties. This process significantly improves the material's toughness, reducing the likelihood of failure in fasteners and enhancing product consistency.
Popular EN AW-2017A aluminum bar products
2017 O aluminum bar
In the annealed state, the aluminum bar is heated to a specific temperature and then slowly cooled, making the material softer. It has the highest toughness and plasticity, making it easy to form and process, but with lower strength. It is suitable for applications requiring significant plastic deformation or bending, such as parts with complex shapes or those requiring subsequent heat treatment.
2017 T3 aluminum bar
This aluminum bar is cold-worked after solution treatment and naturally aged. In this condition, the bar has higher strength and good machinability while maintaining a certain level of toughness. It is widely used in aerospace and automotive parts manufacturing, especially in situations that require medium strength and durability.
2017 T351 aluminum bar
After solution treatment, this aluminum bar undergoes slight stretching to reduce residual stress, followed by natural aging. In this state, the bar offers good dimensional stability and fatigue resistance, making it ideal for precision parts and aerospace structures that require strict dimensional control.
2017 T4 aluminum bar
This aluminum bar is solution-treated and then naturally aged, offering medium strength, toughness, and good machinability. It is suitable for use in the aerospace, automotive, and marine sectors, meeting the demands of applications where strength and machinability are critical.
2017 T451 aluminum bar
After solution treatment, this aluminum bar undergoes slight stretching to release stress and then naturally ages. The 2017 T451 bar combines high strength, good toughness, and dimensional stability, making it suitable for precise mechanical parts and aerospace components that require tight dimensional tolerances.
2017 T4511 aluminum bar
This aluminum bar is drawn after solution treatment to reduce the cross-sectional area and then naturally aged. The T4511 condition provides higher strength and excellent surface quality, making it suitable for high-precision structural parts in aerospace and industrial components that require superior surface finishes.
2017 F40 aluminum bar
The 2017 F40 aluminum bar is an alloy that undergoes special heat treatment (solution treatment + partial work hardening), offering performance characteristics between the T4 and T451 conditions. Its strength and dimensional stability are slightly higher than T4, while its toughness is slightly lower than T451. It is widely used in the aerospace, automotive, and marine industries.
Mastar's various shapes of EN AW-2017A aluminum bar
- 2017 aluminum round bar
- Temper: O, T3, T351, T4, T451
- Diameter: 5-420mm
- Length: 6m, custom cut available
- 2017 aluminum square bar
- Temper: T4, T451
- Size: 10x10-200x200mm
- Length: 6m, custom cut available
- 2017 aluminum rectangle/flat bar
- Temper: T4, T451
- Size: 10x12-100x250mm
- Length: 6m, custom cut available
- 2017 aluminum hexagonal bar
- Temper: T8
- Diameter: 5-25mm
- Length: 2.5m, custom cut available
Looking for stock information on 2017 aluminum bar to reduce the time cost of customization? Click to view Mastar's 2017 aluminum round bar stock list!
Mastar offers EN AW-2017A aluminum bars produced through various manufacturing processes
2017/2017A aluminum wire rod
Temper: T0
DIA: 3-10mm
Produced through continuous casting and rolling processes, this aluminum wire rod features high strength, excellent machinability, good formability, and a consistent metallurgical structure. It is ideal for cold-heading applications such as bolts, screws, and rivets.
EN AW-2017A extrusion aluminum bar
Temper: O, H111, T4, T4510, T4511
DIA: 0.4"-16" (10-420mm)
This extrusion aluminum bar is manufactured by extrusion, offering high dimensional accuracy, a smooth surface, and excellent mechanical properties, with good grain control. It is suitable for structural components that require high precision in size and appearance.
2017/2017A aluminum cold-finished bar
Temper: O, H111, T3, T351
OD: 0.125"-8" (3-200mm)
Cold-finished aluminum bar is precisely machined for accurate dimensions, minimal tolerances, and excellent surface quality while maintaining good mechanical properties. It is suitable for the production of precision parts.
2017 aluminum forged bar
DIA: 7.8"-40" (200-1000mm)
This forged aluminum bar is produced through high-pressure forging, offering extremely high strength and excellent heat resistance. It is ideal for critical components in the aerospace and heavy machinery industries that require both high strength and heat resistance.
2017 aluminum cast billets bar
Temper: F
DIA: 4.8"-53"(124-1350mm)
This cast aluminum billet is typically in the F temper and is suitable as raw material for subsequent forging or extrusion processes. It offers good machinability and is widely used for manufacturing large-diameter bars and high-strength components.
If you would like to learn more about 2017 aluminum bar or have custom requirements, feel free to contact our professional team. We are here to help you find the best solution. Quick Quote
Chemical Composition of 2017/2017A Aluminum Bar
| Element | EN AW 2017A (EN 573) | A92017(ASTM B211) |
| Si | 0.2-0.8 | 0.2-0.8 |
| Fe | 0.7 | 0.7 |
| Cu | 3.5-4.5 | 3.5-4.5 |
| Mn | 0.4-1.0 | 0.4-1.0 |
| Mg | 0.4-1.0 | 0.4-0.8 |
| Cr | 0.1 | 0.1 |
| Ni | - | - |
| Zn | 0.25 | 0.25 |
| Ti | - | 0.15 |
| Zr+Ti | 0.25 | - |
| Each | 0.05 | 0.05 |
| Total | 0.15 | 0.15 |
| Al (min) | rem | rem |
The composition of EN AW 2017A (EN 573) and A92017 (ASTM B211) standards for 2017 aluminum bar is very similar. The EN standard has a slightly higher magnesium (Mg) content, while the ASTM standard clearly limits the titanium (Ti) content. Additionally, the EN standard specifies the total amount of zirconium + titanium (Zr+Ti). Although these differences in composition are minor, they may affect the material's strength, toughness, and high-temperature resistance to some extent.
Overall, 2017 aluminum bars under both standards are interchangeable for most applications, but it is essential to consider specific mechanical property requirements when making a selection.
Mechanical properties of EN AW-2017A aluminum bar
| Mechanical Properties | O/H111 | T3 | T351 | T4/T451 |
| Tensile strength Rm/Mpa | 240 | 400 | 400 | 400 |
| Yield strength Rp0.2/Mpa | 135 | 250 | 250 | 270 |
| Elongation | 10-12% | 8-10% | 6-8% | 8-10% |
| Hardness | 45 | 105 | 105 | 105 |
UNS A2017 aluminum bar standard specifications
- ASTM B211 / ASME SB211 - Specifications for rolled or cold-finished aluminum and aluminum alloy bars and rods
- ASTM B221 / ASME SB221 - Specifications for extruded aluminum and aluminum alloy bars and rods
- ASTM B565 / ASME SB565 - Shear testing methods for aluminum and aluminum alloy rivet and cold-heading bars
- ASTM B316 / ASME SB316 - Standard specifications for aluminum and aluminum alloy rivet and cold-heading bars and rods
- AMS 4118 / ISO AlCu4MgSi - Standard specifications for cold/hot-rolled aluminum and aluminum alloy bars and rods
- AMS-QQ-A-225/5 - Aluminum alloy bars, rods, and wires, rolled, drawn, or cold-finished
- AMS-QQ-A-430 - Aluminum alloy wires and rivet materials
Optimal applications for 2017/2017A aluminum bar
2017 Aluminum Wire Rod for Cold Heading- Commonly used for making bolts, screws, and rivets, this aluminum wire rod offers high strength, wear resistance, and good formability. It is especially suitable for fasteners and connectors in aerospace, automotive, and mechanical manufacturing.
2017 Aluminum Rod Bar for Aerospace- 2017 T4/T451 aluminum rod bars, with their high strength and excellent fatigue resistance, are widely used in key aerospace components such as aircraft structures, frames, and supports.
2017 Aluminum Rod Bar for Automotive- 2017 aluminum rod bars are ideal for automotive chassis components, suspension parts, and other high-strength, lightweight parts to improve fuel efficiency and performance.
2017 Aluminum Rod Bar for Machinery- 2017 aluminum rod bars excel in precision machining applications, such as high-precision gears, shafts, and bolts. They are suitable for CNC machining, turning centers, and other precision equipment.
What are Mastar's advantages as an aluminum bar supplier?
- Product Quality: We strictly implement multiple inspection processes to ensure that all aluminum bars leaving the warehouse meet AMS, EN, and NADCAP standards and certifications. The quality is fully monitored throughout the process to guarantee that each aluminum bar is reliable.
- Delivery Time: With a stock of tens of thousands of tons, regular sizes can be directly matched with existing inventory, ensuring fast shipment. Our advanced equipment and professional team shorten delivery times, offering convenient logistics with on-time delivery.
- Price Advantage: We support retail and bulk purchasing by metal distributors, providing discounts and rebate policies for B2B bulk customers. Our pricing is open and transparent, ensuring a price advantage for bars of the same quality.
- Customer Service: We offer comprehensive after-sales service to resolve customer concerns. Our experienced technical team provides professional consultation and guidance, and we have established a complete customer service system to ensure a high-quality service experience.
Mastar EN AW-2017A aluminum bar stock list
| Description | Alloy | Diameter in | Diameter mm | Length m |
| 0.787" 2017 T4 Aluminum Bar | 2017 | 0.787 | φ20 | 3 |
| 1.181" 2017 T4 Aluminum Bar | 2017 | 1.181 | φ30 | 3 |
| 1.575" 2017 T4 Aluminum Bar | 2017 | 1.575 | φ40 | 3 |
| 1.969" 2017 T4 Aluminum Bar | 2017 | 1.969 | φ50 | 3 |
| 2.362" 2017 T4 Aluminum Bar | 2017 | 2.362 | φ60 | 3 |
| 2.756" 2017 T4 Aluminum Bar | 2017 | 2.756 | φ70 | 3 |
| 2.756" 2017 T4 Aluminum Bar | 2017 | 2.756 | φ70 | 3 |
| 3.150" 2017 T4 Aluminum Bar | 2017 | 3.15 | φ80 | 3 |
| 3.543" 2017 T4 Aluminum Bar | 2017 | 3.543 | φ90 | 3 |
| 3.937" 2017 T4 Aluminum Bar | 2017 | 3.937 | φ100 | 3 |
| 4.331" 2017 T4 Aluminum Bar | 2017 | 4.331 | φ110 | 3 |
| 4.724" 2017 T4 Aluminum Bar | 2017 | 4.724 | φ120 | 3 |
| 5.118" 2017 T4 Aluminum Bar | 2017 | 5.118 | φ130 | 3 |
| 5.512" 2017 T4 Aluminum Bar | 2017 | 5.512 | φ140 | 3 |
| 5.512" 2017 T4 Aluminum Bar | 2017 | 5.512 | φ140 | 3 |
| 5.906" 2017 T4 Aluminum Bar | 2017 | 5.906 | φ150 | 3 |
| 6.299" 2017 T4 Aluminum Bar | 2017 | 6.299 | φ160 | 3 |
| 6.299" 2017 T4 Aluminum Bar | 2017 | 6.299 | φ160 | 3 |
| 1.693" 2017A T6 Aluminum Bar | 2017A | 1.693 | φ43 | 3 |
Don't see the size you need in our stock list? If the diameter fits your project requirements, we offer custom-cut services. Alternatively, you can contact our sales manager for a custom solution. Quick Quote